9. MAINTENANCE

  1. CAUTION : Remove mains cord before maintenance.
  2. Clean the machine daily after use.
  3. Clean element and element bed to remove any adhesive deposited on it.
  4. Check the oil level every week.
  5. Note: Use vacuum pump grade oil. Common automotive lubricants must not be used. We recommend using SEVANA vacuum pump oil.
  6. An “Oil change” message will be displayed upon the completion of every 5000 operation cycles. Drain out the existing oil and pour in new oil as per instructions. Then press the
  7. SET, UP and DOWN buttons together to reset the Oil alarm.