7. SETTINGS

  • 1. Filling Time: Adjust the pump working time & control the amount of filling range.
  • 6. Setting: Take a measuring cup, or directly put your bottle under the filling nozzle, press the setting key of the
  • filling machine, and start adding material. When the required quantity is reached, press the setting key again, the machine will stop working. The filling time shown on the display is the quantity of material filling needed.
  • The machine will remember your filling amount using the setting key. And then following you can choose
  • 7. Fixed Point: Switch to Manual mode and press the button Fixed point and it will fill as long as you press the

8. OPERATION

  • 2. Turn ON the power switch on the backside of the machine.
  • 3. Set the filling time & filling speed as per the requirement. The waiting time needs to be set if the machine is
  • 4. Place the Bottle under the filling nozzle.
  • 5. Press the Pedal Switch (When the machine is in manual mode). The material will discharge through the
  • 6. Turn off the machine when not in use.