9. CONTROL PANEL

  • Power Switch

10. PROGRAM MODES

  • Fill Time: 0-999.9 Sec
  • Auto stop Count:0-99999
  • Mode/Stop
  • Set
  • An LCD check function is done first. Version of the software is displayed.
  • In this mode, press the pedal switch or down button to start filling. Release the switch to stop filling.
  • Select the mode by pressing the “MODE” button.
  • To set the parameters press the “SET” button.

11. OPERATION

  • Connect the pedal switch
  • Switch on the power button
  • Select the required mode
  • Adjust the required parameters
  • Press the pedal switch or Down button for starting the filling.
  • To stop the function, press the Mode button while it is operating